Dosing station "Sol-Tec SL", for dry rooms
Art.No.: 94.5264
Shipping time: immediately
|
|
Dosing station "Sol-Tec SL"
Metering station for the evaporisation of brine solution for the creation of a salty sea climate for dry rooms (Tepidarium, Caldarium)
The Sol-Tec SL evaporates brine solution with the help of compressed air. After a short time you´ll receive a salty sea climate in the room.
The unit has different operation parameters to be adjusted easily. Therefore the unit can be adapted to the general conditions and the place of use. The dosing capacity depends on the climate and the air exchange of the place of use.
In general the Sol-Tec SL can be used for rooms with app. 35m².
Scope of delivery:
- Hosuing with microprocessor controller
- rpm-controlled peristaltic pump for the adjustment of the dosing quantity of the brine
- Diaphragm piston compressor
- Disinfection set
- Console VA for 5l brine bag
- Two-component jet VA with grommet and cover screen
- Empty switch for the switch-off of the unit if the brine bag gets empty
- incl. 5 liters sterilised brine solution (approx. 5%)
Technical details:
- Hosuing: HWD = 200 x 300 x 120 mm
- Dosing performance: up to app. 3,2 l/h (in endurance operation)
- Measures: HWD = 580 x 630 x 250 mm
- Power consumption: 400 Watt
- Power supply: plug 230V / 50Hz
Please note:
Before the installation of a Sol-Tec SL all materials in the steam cabinet have to be checked on their resistance against brine solution!
Use only pure, sterilized brine solution with a salt concentration of app. 5%. The brine solution is delivered in an absolute sterile condition. Outstanding brine solution is affected by bacterial impact and so should not be used.
|
